Câu hỏi thi ISTQB

Chuyên đề thảo luận các vấn đề liên quan đến ISTQB Certificate.
(ISTQB = International Software Testing Qualifications Board)
Forum rules
Trong chuyên đề này, các bạn chỉ thảo luận các vấn đề liên quan đến ISTQB Certificate.
Post Reply
tvbphin
Fresher Tester
Posts: 14
Joined: Wed 24 Dec, 2014 4:01 pm
Contact:

Câu hỏi thi ISTQB

Post by tvbphin » Fri 22 Jan, 2016 1:42 pm

Hi mọi người, mình vừa làm thử một đề thi ISTQB, nhưng có nhiều câu không biết đáp án chính xác. Xin hỏi có bạn nào giúp mình xin mấy câu trả lời sau nhé. Thanks

1.
A. Validation is for implemeting the correct thing
B. Verification is for implementing the thing correct

a/ A is True and B is TRue
b/ A is True and B is False
c/ A is False and B is False
d/ A is False and B is True

2. In a software application, there was implementation done based on the 4 age groups as 0 - 10, 11-25, 26-50, and 50+. Which testing technique you will apply to find out possible issues in the application without running it
a/ Classification tree
b/ Equivalence Partitioning System
c/ Boundary Value Analysis
d/ Error Guessing

3. Error handling in code is mainly done as there are erros in the code
a/ True
b/ False

4. Which type of testing requires Stubs and drivers? Select one anwser that applies correctly
a/ Integration Testing
b/ Component Testing
c/ Bottom Up Testing
d/ Top Down Testing

5. Test cases can be designed in the exploratory testing
a/ True
b/ False

6. Which of the following is not an input to the deisgn phase? Select one answer that applies correctly
a/ A functional Specification
b/ BRD
c/ Program Specifications
d/ Technical Architecture document

7. ____ identifies many possible reasons for an issues or an error. It gives quick ideas for useful categories. Select one answer that applies correctly
a/ Fish-Bone diagram
b/ Histogram
c/ Pareto analysis
d/ Decision table

8. Error added by programmer intentionally in the code is called as _________
a/ Error seeding
b/ Error handling
c/ Error planting
d/ Error guessing

9. The testing performed on data for performing the basic operation on it is called as ____
a/ CRUD Testing
b/ Data Driven Testing
c/ Data Validation techniques
d/ Data Mining

10. To ensure the quality of software is a process that can only be made by using it. Therefore, reading the code cannot be useful in any way
a/ True
b/ False

11. Functions and procedures used for each unit needs to be documented in ____
a/ Unit Test Plan
b/ Program Specifications
c/ Functional Specifications
d/ Design Specifications

12/ The functionalities to be covered or not is specified in one of the following
a/ Test Plan
b/ Test Strategy
c/ Test Reporting
d/ Test Approach

13. Error Handling, Exception Handling & Memory leakage can be determined by
a/ Program Review
b/ Code Review
c/ Test Case Review
d/ None of the above

14. The technique used for finding the few origins of majors issues withing the aplication is known as:
a/ Histogram
b/ Fishbone diagram
c/ Pareto Technique
d/ Classification Tree Technique

15. _____determines if a new software version is perfroming well enough to accept for a major testing effert
a/ Black Box Testing
n/ Sanity Testing
c/ Regression Testing
d/ Stress Testing
e/ Load Testing

16. FP and lines of code are measure of ______
a/ Effort
b/ Schedule
c/ Size
d/ All of the above

17. Behavior driven testing focuses on the _________
a/ Requirements
b/ Specifications
c/ Test Plan
d/ Agile Methodology

18. Having Risk management in a project helps in
i. Mitigating the risks associated with the project
ii. Managing project without surprises
iii. Identifying potential problems
iv. Project Plan contingency

a/ i, iii, iv
b/ ii, iii, iv
c/ i, ii, iii
d/ i, ii, iii, iv

19. Testing interfaces between unit, modules and sub-systems when the system is incrementally put together is known as _____
a/ Destructive Testing
b/ Integrated Testing
c/ Integration Testing
d/ User Interface Testing

20. The Cyclomatic Complexity helps to understand ______
i. Code Complexity
ii. Testing Complexity
iii. Efforst & Cost
iv. Planning Test Execution

a/ i, ii, iii, iv
b/ i, iii, iv
c/ i, ii
d/ i, ii, iii
e/ only ii



tvn
Admin
Posts: 4794
Joined: Tue 10 Aug, 2010 10:11 am
Location: HCM
Contact:

Re: Câu hỏi thi ISTQB

Post by tvn » Sat 23 Jan, 2016 11:10 pm

Mình làm trước một số câu nhé

1.
A. Validation is for implementing the correct thing
B. Verification is for implementing the thing correct

=> a/ A is True and B is True

2. In a software application, there was implementation done based on the 4 age groups as 0 - 10, 11-25, 26-50, and 50+. Which testing technique you will apply to find out possible issues in the application without running it

=> a/ Classification tree

3. Error handling in code is mainly done as there are errors in the code

=> b/ False => vì Error handlers phải đối phó với lỗi trong code và cả lỗi khi ứng dụng đang thực thi.

4. Which type of testing requires Stubs and drivers? Select one anwser that applies correctly

=> a/ Integration Testing

5. Test cases can be designed in the exploratory testing

=> a/ True



tvn
Admin
Posts: 4794
Joined: Tue 10 Aug, 2010 10:11 am
Location: HCM
Contact:

Re: Câu hỏi thi ISTQB

Post by tvn » Sat 23 Jan, 2016 11:23 pm

Câu 6. Which of the following is not an input to the design phase? Select one answer that applies correctly

a/ A functional Specification
b/ BRD
c/ Program Specifications
d/ Technical Architecture document

BRD viết tắt của từ gì? nếu là URD thì có thể là User Requirements Document (Tài liệu mô tả yêu cầu của người dùng)
Nếu câu b là URD thì mình chọn đáp án là D. Technical Architecture document



tvbphin
Fresher Tester
Posts: 14
Joined: Wed 24 Dec, 2014 4:01 pm
Contact:

Re: Câu hỏi thi ISTQB

Post by tvbphin » Mon 25 Jan, 2016 2:49 am

BRD là Business Requirement Document



tvn
Admin
Posts: 4794
Joined: Tue 10 Aug, 2010 10:11 am
Location: HCM
Contact:

Re: Câu hỏi thi ISTQB

Post by tvn » Mon 25 Jan, 2016 12:59 pm

tvbphin wrote:BRD là Business Requirement Document
Neu vay, no cung nhu User Requirement Document thoi, nen van chon dap an D. :D



tvbphin
Fresher Tester
Posts: 14
Joined: Wed 24 Dec, 2014 4:01 pm
Contact:

Re: Câu hỏi thi ISTQB

Post by tvbphin » Mon 25 Jan, 2016 1:06 pm

Bộ đề này khó quá chừng, mình làm xong chỉ biết đạt 8/20 thôi, mà chưa có đáp án nên cũng không biết làm câu nào đúng câu nào sai



tvn
Admin
Posts: 4794
Joined: Tue 10 Aug, 2010 10:11 am
Location: HCM
Contact:

Re: Câu hỏi thi ISTQB

Post by tvn » Mon 25 Jan, 2016 10:54 pm

8. Error added by programmer intentionally in the code is called as _________
=> a/ Error seeding

9. The testing performed on data for performing the basic operation on it is called as ____
=> a/ CRUD Testing
(Test thử một số thao tác trên tập data sẵn có Create, Read, Update and Delete)

10. To ensure the quality of software is a process that can only be made by using it. Therefore, reading the code cannot be useful in any way
=> b/ False

11. Functions and procedures used for each unit needs to be documented in ____
=> c/ Functional Specifications

12/ The functionalities to be covered or not is specified in one of the following
=> a/ Test Plan



Post Reply

Return to “ISTQB Certificate - Chứng chỉ ISTQB”